ABOUT PRODUCTS

SPECIFICATION OF THE SHEETS

.They are very resistible to outside atmospheric conditions,
.Resistible for chemicals and corrosion of enviromental conditions,
.It gives good transparency to the sun light,this allows us to save energy,
.It is very hygienic,never gets dusty,non-flammable
.It is very usable for accidic environments..
.Because it is very feasible to the other structural elements,it can be use very wide range in the construction Indsutry
.In General shape of sea-wave and flat,sometimes transparent sometimes opaque in color.

PHYSICAL PROPERTIES
 
Specific density              :    1,4g/cm3
Shear Stress                  :    528-565kg/cm2
Shear Elongtaion %            :    420kg/cm2
E-modulus                     :    32,125kg/cm2
Bending Force                :    850-1100 kg/cm2
Constant Force               :    215kg/cm2
Resistance to Pressure         :    680-1140kg/cm2
Twist Movement              :    7130kg/cm2 (Normal)
Resistance to emperatures     :    -45 +83 Santigrade Celcius
Flame Class                     :    A-1

APPLICATION

CUTTING             :

The Sheets can be cut with the automatic saw and also you can order some standard sizes as well as special ones.

TO MAKE HOLE            :

. You can Drill the material on the top.But you must allow the sheet to lengthen and to shorten according to environmental heating and cooling conditions like 1-1,5mm.As far as the sealing is concerned please use gaskets to stop rain leakage.

. Never make a hole with nail

ASSAMBLING THE SHEETS        :

The sheet must be fixed with ''trifon'',stainless steel hooks or wise screws which can be obtained from 'SERONOVIL'

Always the Sheets are placed against the opposite of the wind direction.
When you screw down the sheets never apply to much power to destroy the gaskets.Tight it gently.Apply the hooks always from the top of the sheet.Use the hook for every 3 waves advisable.

And Sheets always cover with the other sheet at least one wave or 5 cm.